Here are some quick ways to remove rust from metal badges:
White vinegar soaking method: The rusty metal badge is soaked in white vinegar for a period of time. The acid in white vinegar breaks down rust and can be soaked for a few hours or more, depending on the severity of the rust. Remove after soaking, rinse with clean water, and dry with a clean soft cloth.
Lemon juice wiping method: Lemon juice also has a certain acidity, can play a role in rust removal. Use a cotton ball or soft cloth dipped in lemon juice, and then gently wipe the rust on the metal badge, repeatedly wipe several times, and then clean with water and wipe dry.
Baking soda Paste: Mix baking soda and water to make a paste. Apply the paste to the rust of the metal badge and wipe it gently with a soft cloth or brush. Baking soda can act as a gentle grinding and decontamination. After wiping, rinse with water and dry.
Toothpaste wipe method: Choose ordinary white toothpaste. Squeeze toothpaste over the rust and rub gently with a soft cloth or towel. The tiny particles in the toothpaste can help grind the rust away without causing too much damage to the metal surface. Wipe clean, rinse with water and dry.
Professional rust remover: If the rust is more serious, professional metal rust remover can be used. According to the requirements of the product manual, spray or paint the rust on the metal badge, wait for a period of time, the rust will be dissolved or loosened, and then rinse with water or wipe off the rust with a cloth, and then dry with a clean cloth. After the use of rust remover, it is best to carry out some protective treatment on the metal badge, such as applying anti-rust oil.
No matter which method is used, after removing the rust, you can consider taking some protective measures, such as applying a small amount of anti-rust oil, placing the badge in a dry and ventilated place, etc., to prevent the metal badge from rusting again.
Post time: Apr-02-2025